aiCall
» Versions
» Examples
» Purchase
» Stack analysis
» About us
» Products
» WCET
» Press center
» Contact
aiCall for C16x/ST10¹ supports all 16-bit C16x/ST10 and XC16x/C16x2 microcontrollers from Infineon Technologies and ST Microelectronics, including:
- C161V-L16M, C161K-L16M, C161O-L16M, C161RI-L16M, C161RI-L16F
- C161OR, C161U, C161PI-LM, C161PI-LF
- C163-LF, C163-L25F
- C164CI-8EM, C164CI-8RM, C164CI-LM, C164CI-4RM, C164CL-4RM, C164SI-8RM
- C165-LM, C165-L25M, C165-LF, C165-L25F, C165UTAH, C165H
- SAB80C166-M, SAB80C166-M25, SAB80C166W-M
- SAB83C166-5M, SAB83C166-5M25, SAB83C166W-5M
- C167-LM, C167S-4RM, C167SR-LM
- C167CS-LM, C167CS-4RM, C167CS-32FM
- C167CR-LM, C167CR-L25M, C167CR-4RM, C167CR-16RM
- SDA6000
- C166v2/XC16x
- ST10R172L, ST10R272L, ST10R167, ST10F168, ST10F275, ST10F276, ST10F280
aiCall for PowerPC¹ supports all 32-bit PowerPC microprocessors from Motorola and IBM, including:
- 405CR, 405EP, 405GP, 405GPr, NPe405
- 440GP, 440GX
- 604e, 603e/EM603e
- 740/750, 750FX, 750CX/750CXe
- MPC505, MPC509, MPC555, MPC556
- MPC5600, MPC561, MPC563, MPC565
- MPC603
- MPC70
- MPC740, MPC7400, MPC7410, MPC7450, MPC7451, MPC7455
- MPC755
- MPC801, MPC821, MPC823, MPC850, MPC855, MPC857, MPC860, MPC862
- MPC8240, MPC8245, MPC8260, MPC8261, MPC8264, MPC8265
- MPC8540, MPC8560
- e500
- Motorola PowerQUICC family
aiCall for C supports the following standards:
- ANSI C
- K&R C
aiCall for HC12¹ supports the HC12/STAR12/HCS12 microcontroller families.
Packages for X86¹, ColdFire¹, ARM¹, TMS320C3x¹ and NEC V850¹ are available on request. Support for further target processors¹ is currently under development.
¹ Available only in combination with a stack usage analysis module.
«
